
تعداد نشریات | 13 |
تعداد شمارهها | 623 |
تعداد مقالات | 6,502 |
تعداد مشاهده مقاله | 8,643,607 |
تعداد دریافت فایل اصل مقاله | 8,239,595 |
تاثیر فاصله کاشت بر دانسیته و بیومتری الیاف چوب صنوبر دلتوئیدس (مطالعه موردی در جنگل ساری) | ||
پژوهشهای علوم و فناوری چوب و جنگل | ||
مقاله 8، دوره 24، شماره 4، اسفند 1396، صفحه 101-116 اصل مقاله (260.05 K) | ||
نوع مقاله: مقاله کامل علمی پژوهشی | ||
شناسه دیجیتال (DOI): 10.22069/jwfst.2018.12631.1656 | ||
نویسنده | ||
مجید کیائی* | ||
دانشگاه ازاد اسلامی واحد چالوس | ||
چکیده | ||
چکیده سابقه و هدف: کارخانه چوب و کاغذ مازندران به منظور تامین مواد اولیه جهت تولید کاغذ اقدام به کشت گونه تندرشد صنوبر در فواصل کاشت مختلف نموده است. این عامل میتواند مقدار رویش قطری، ارتفاعی و در نهایت کیفیت چوب درختان به دلیل رقابت ریشهای و تاجی در کسب نور، آب و مواد غذایی را تحت تاثیر قرار دهد. بنابراین تحقیق حاضر با هدف بررسی تاثیر فاصله کاشت و محور طولی درخت بر دانسیته خشک و خواص بیومتری الیاف چوب صنوبر دلتوئیدس مورد بررسی قرار گرفت. مواد و روشها: تعداد 9 اصله درخت سالم صنوبر (Populus deltoids) در سه فاصله کاشت (2×2، 2×3 و 3×3 مترمربع) در طرح جنگلکاری صنایع چوب و کاغذ مازندران انتخاب و سه دیسک در محور طولی درخت از ارتفاع برابر سینه، 50 درصد و 75 درصد ازارتفاع درختان برای محاسبه خواص چوب صنوبر (دانسیته خشک، طول الیاف، قطر الیاف، ضخامت دیواره سلولی، ضریب انعطاف پذیری، نسبت رانکل و نسبت درهمرفتگی) بریده شد. یافتهها: آزمون تجزیه واریانس نشان داد که تاثیر مستقل فاصله کاشت بر دانسیته خشک، ابعاد الیاف و نسبت درهمرفتگی معنیدار و بر ضریب انعطافپذیری و نسبت رانکل غیرمعنیدار است. تاثیر مستقل محور طولی درخت بر دانسیته خشک و خواص بیومتری غیرمعنیدار است. تاثیر متقابل فاصله کاشت و محور طولی درخت بر همه خواص چوب صنوبر دلتوئیدس به غیر از قطر الیاف غیرمعنیدار است. بیشترین میانگین دانسیته خشک، طول الیاف، قطر الیاف، ضخامت دیواره سلولی و ضریب انعطافپذیری در فاصله کاشت 2×2 و کمترین میانگین آن در فاصله کاشت 2×3 مترمربع مشاهده شد. نسبت درهمرفتگی و رانکل در فاصله کاشت 2×3 مترمربع نسبت به سایر فواصل کاشت بیشتر بود. ارتباط مثبت و معنیدار بین رویش طولی و قطری با دانسیته و ابعاد الیاف چوب صنوبر دلتوئیدس وجود دارد. نتیجهگیری: با توجه به نتایج بدست آمده میتوان کاشت صنوبر دلتوئیدس در فواصل کمتر برای رفع کمبود ماده اولیه برای صنعت کاغذسازی مازندران جهت تولید کاغذ را پیشنهاد کرد. یافتهها: آزمون تجزیه واریانس نشان داد که تاثیر مستقل فاصله کاشت بر دانسیته خشک، ابعاد الیاف و نسبت درهمرفتگی معنیدار و بر ضریب انعطافپذیری و نسبت رانکل غیرمعنیدار است. تاثیر مستقل محور طولی درخت بر دانسیته خشک و خواص بیومتری غیرمعنیدار است. تاثیر متقابل فاصله کاشت و محور طولی درخت بر همه خواص چوب صنوبر دلتوئیدس به غیر از قطر الیاف غیرمعنیدار است. بیشترین میانگین دانسیته خشک، طول الیاف، قطر الیاف، ضخامت دیواره سلولی و ضریب انعطافپذیری در فاصله کاشت 2×2 و کمترین میانگین آن در فاصله کاشت 2×3 مترمربع مشاهده شد. نسبت درهمرفتگی و رانکل در فاصله کاشت 2×3 مترمربع نسبت به سایر فواصل کاشت بیشتر بود. ارتباط مثبت و معنیدار بین رویش طولی و قطری با دانسیته و ابعاد الیاف چوب صنوبر دلتوئیدس وجود دارد. واژههای کلیدی: صنوبر دلتوئیدس، فاصله کاشت، دانسیته، بیومتری الیاف، | ||
کلیدواژهها | ||
صنوبر دلتوئیدس؛ فاصله کاشت؛ دانسیته؛ بیومتری الیاف | ||
مراجع | ||
1. Bektas, I., Tutus, A., and Eroglu, H. 1999. A study of the suitability of Calabrian pine (Pinus Brutiaten.) for pulp and paper manufacture. Turk Journal of Agriculture and Forestry. 23: 589-599. (In Persian) 2. Clark, A., Jordan, L., Schimleck, L., and Daniels, R. 2008. Effect of initial planting spacing on wood properties of unthinned loblolly pine at age 21. Forest Products Journal. 58(10): 78- 83. (In Persian) 3. DeBell, J.D., Gartner, B.L., and DeBell, D.S. 1998. Fiber length in young hybrid Populus stems grown at extremely different rates. Canadian Journal of Forest Research. 28: 603–60. 4. DeBell, D.S., Singleton, R., Harrington, A., and Gartner, L.B. 2002b. Wood density and fiber length in young Populus stems: relation toclone, age, growth rate, and pruning. Wood Fiber Sci. 34(4): 529–539. 5. Dorostkar, H. 1985. Foresters. University of Agriculture and Natural Resources, Gorgan University. 6. Efhami SiSi, D., Karimi, A.N., Pourtahmasi, K., Asadi, F., and Mohamadzadeh, M. 2012. The Effects of Agroforestry Practices on Physical Properties in of Poplus Wood in Radial and Longitudinal Axes. Iranian Journal of Wood and Paper Industries. 2(2): 53-64 (In Persian) 7. Efhamisisi, D., Karimi, A.N., Pourtahmasi, K., and Taghiyari, H.R. 2012. The Effects of Agroforestry Practices on Fiber Attributes in Populus nigra var. betulifolia. Trees-Structure and Function. 26(2): 435-441. 8. Enayati, A.A., Hamzeh, Y., Mirshokraie, S.A., and Molaii, M. 2009. Papermaking potential of canola stalks.Bioresource. 4(1): 245-256. 9. Eroglu, H. 1980. Investigating possibilities of obtaining wood pulp from wheat straw by O2- naoh method. Ph.D Thesis, Karadeniz Technical University. 10. Fallahnia, M., and Rafighi, A. 2012. The effect of initial spacing on bole form and annual growth of (Acer velutinum). J. of Wood and Forest Science and Technology, 19(2): 153-159. (In Persian) 11. Franklin, G.L. 1945. Preparation of thin sections of synthetic resinsand wood-resin composites, and a new macerating method forwood. Nature 155: 51. 12. Fujiwara, S., and Yang, K.C. 2000. The relationship between cell length and ring width and circumference growth rate in five Canadian species. IAWA J 21(3): 335–345. 13. Harris, F.C. 2007. The effect of competition on stand, tree, and wood growth and structure in subtropical Eucalyptus grandis plantations. PhD thesis, Southern Cross University, Lismore, NSW, Australia, 193p. 14. Hosseinzadeh, A., Toghraei, N., Sheikholeslami, A., Sadraei, N., Golbabaei, A. andHemmati, A. 1998. Effect of spacing on wood properties and yield of two Populus deltoides clone in Safrabasteh (Gilan). Iranian Journal of Pajouhesh and Sazandegi in Natural Resources. 38(1): 45-49 (In Persian) 15. Hunsigi, G. 1989. Agriculture fibers for paper pulp. Outlook on Agriculture. 18(3): 96-103. 16. Ishiguri, F., Kasai, S., Yokota, S., Iizuka, K., and Yoshizawa, N. 2005. Wood quality of Sugi (Cryptomeria Japonical) grown at four initial spacing. IAWA Journal. 26(3): 375-386. 17. Istas, J.R., Heremansm, R., and Roekelboom, E.L. 1954. Caracteres Generaux De Bois Feuillus Du Congo Belge En Relation Avec Leur Utilization Dans I ‘industrie Des Pates A Papier: Etude Detaillee De Quelques Essences. Gembloux: INEAC (Serie Technique, No. 43). 18. Khan, C.S., and Chaudhry, A.K. 2007. Effect of spacing and plant density on the growth of poplar (Populur deltoides) trees under Ander Agro-Forestry System. Pak. J. Agri. Science. 44(2): 321-327. 19. Kollman, F.F.P., and Cote, W.A. 1968. Principles of wood science and technology. 1. Solid wood, Springer- Verlag, New York. 20. Lei, H., Gartner, L.B., and Milota, M.R. 1997. Effect of growth rate on the anatomy, specific gravity, and bending properties of wood from 7-yearold red alder (Alnus rubra). Canadian Journal of Forest Research. 27: 80-85. 21. McDougall, G.J., Morrison, I.M., Stewart, D., Weyers, J.D.B., and Hillman, J.R. 1993. Plant fibers: botany chemistry and processing. Journal of the science of Food and Agriculture, 62: 1-20. 22. Naji, H.R., Fallah Nia, M., Kiaei, M., Hazandy, A.H., Soltani, M., and Faghihi, A. 2015. Effect of intensive planting density on tree growth, wood density and fiber properties of maple (Acer velutinum Boiss.). IForest Biogeosciences and Forestry, 9: 323-329. 23. Naji, H.R., Sahri, M.H., Nobuchi, T., Bakar, E.S. 2013. Intra- and inter-clonal variation in anatomical properties of Hevea brasiliensis Muell. Arg. Wood and Fiber Science, 45(3): 268-278. 24. Ramazami, S., Talaeipour, M., Aliabadi, M., Tabeei, A., and Bazyar, B. 2013. Investigation of the antomical, biometry and chemical characteristics of juvenile and mature poplar (Populus alba) wood. Iranian Journal of Wood and Paper Science Research, 28(1): 182-193. 25. Riahifar, N., Fallah, A., Mohammadi Samani, K., and Gorji Mahlebani, Y. 2009. Comparing the growth of Paulownia fortunei and Populus deltoides plantations under different spacing in northern Iran. Iranian Journal of Forest and Poplar Research, 16(3): 444-454. 26. San, H.P., Long, L.K., Zhang, C.Z., Hui, T.C., Seng, W.V., Lin, F.S., Hun, A.T., and Fong, W.F. 2016. Anatomical features, fiber morphological, physical and mechanical properties of three years old new hybrid Paulownia: Green Paulownia. Research Journal of forest, 10: 30- 35. 27. Sidhu, D.S., and Dhillon, P.S. 2007. Field Performance of ten Clones and two Sizes of Planting Stock of Populus deltoides on the IndoGangetic Plains of India. New Forest, 34(2): 115-122. 28. Snook, S.K., Labosky, P.l., Bowersox, T.W., and Blankenhorn, P.R. 1986. Pulp and paper making properties of a hybrid poplar clone grown under four management strategies and two soil sites. Wood and Fiber Science. 18(1): 157–167. 29. Wimmer, R., Downes, G.M., Evans, R., Rasmussen, G., and French, J. 2002. Direct Effects of Wood Characteristics on Pulp and Handsheet Properties of Eucalyptus globulus. Holzforschung, 56: 244-252. 30. Xu, F., Zhong, X.C., Sun, R.C., and Lu, Q. 2006. Anatomy, ultra structure, and lignin distribution in cell wall of Caragana Korshinskii. Industrial Crops and Production, 24: 186- 193. 31. Zobel, B.J., and Van Buijtenen, J.P. 1989. Wood variation: its causes and control. Springer Series in Wood Science, Springer-Verlag, 363p. 32. Zobel, B. 1992. Silvicultural effects on wood properties. IPEF International, Piracicaba, Brazil, 2: 31-38. | ||
آمار تعداد مشاهده مقاله: 1,036 تعداد دریافت فایل اصل مقاله: 1,368 |