ساخت و ارزیابی خواص فیلم نانو چندسازه پلی اتیلن سبک حاوی نانو الیاف سلولزی

1.Abdul Majid, R., Ismail, H., and Mat Taib, R. 2010. Properties of low density polyethylene/ thermoplastic sago starch reinforced kenaf fibre composites. Iranian Polymer J. 19: 7. 501-510.

2.Ahmadi, M., Behzada, T., Bagheria, R., and Heidarian, P. 2018. Effect of cellulose nanofibers and acetylated cellulose nanofibers on the properties of low-density polyethylene/thermoplastic starch blends. International Polymer.
3.Alidadi-Shamsabadi, M., Behzad, T., Bagheri, R., and Nari-Nasrabadi, B. 2015. Preparation and Characterization of Low Density Polyethylene /Thermoplastic Starch Composites Reinforced by Cellulose Nanofibers. Polymer Composites. 36: 12. 2309-2316.

4.Arbelaiz, A., Fernandez, B., Cantero, G., liano pote, R., Valea, A., and Mondragon, I. 2005. Mechanical properties of short flax fiber bundle/ polypropylene
composites. Influence of matrix/ fiber modification,fiber content, water uptake and recycling. J. of composites science and technology 65: 1582-159.

5.Diallo, A.K., Jahier, C., Drolet,R., Tolnai, B., and Montplaisir, D.2019. Cellulose filaments reinforced low-density  polyethylene. Polymer Composites. 10: 16-23.

6.Dufresne, A., Dupeyre, D., and Paillet, M. 2002. Lignocellulosic flour-reinforce poly (hydroxybutyrate-co-valerate) composites. J. of Applied Polymer Science.87: 3.1302-1315.

7.Dufresne, A., and Belgacem, M.N. 2013. Cellulose reinforced composites: from micro to nanoscale, overview, polymeros. Science and Technology. 23: 3. 277-286.

8.Elanmugilan, M., Sreekumar, P.A., Singha, N.K., Al-Harthi, M.A., and De, S.K. 2013. Natural weather, soil burial and sea
water ageing of low-density polyethylene: effect of starch/linear low density polyethylene masterbatch. J. of Applied Polymer Science, 129: 1. 449-452.

9.Gacitua, W.E., Ballerini, A.A., and Zhang, J. 2005. Polymer nanocomposites: synthetic and natural fillers a review. Science and Technology. 7: 3. 159-178.

10.Gontard, N., Guilbert, S., and Cuq, J.L. 1992. Edible wheat gluten films: Influence of the main process variables on film properties using response surface methodology. J. of Food Science. 57:1. 190-195.

11.Gousse, C., Chanzy, H., Cerrada, M.L., and Fleury, E. 2004. Surface silylation of cellulose microfbrils: preparation
and rheological properties. Polymer.45: 1569-1575.

12.Graya, N., Hamzeha, Y., Kabooranib, A., and Abdulkhani, A. 2018. Influence of cellulose nanocrystal on strength
and properties of low density polyethylene and thermoplastic starch composites. Industrial Crops and Products. 115: 2018. 298-305.

13.Gupta, A., Kumar, V., and Sharma, M. 2010. Formulation and characterization of biodegradable packaging film
derived from potato starch and LDPE grafted with maleic anhydride LDPE Composition. J. of Applied Environment. 18: 4. 484-493.

14.Henry, S.M., Sayed, M.E.H., Pirie, C.M., Hoffman, A.S., and Stayton, P.S. 2006. pH-responsive poly (styrene-alt maleicanhydride) alkylamidecopolymers for intracellular drug delivery. Biomacromolecules. 7: 8. 2407-2414.

15.Kampeerapappun, P., Aht-ong, D., and Pentrakoon, D. 2007. Preparation of cassava starch/montmorillonite composite film. Carbohydrate Polymers. 67: 2. 155-163.

16.Kazimi, M.R. 2014. Characterization of Functionalized Low Density Polyethylene/Polyaniline Nano Fiber Composite. J. of Medical and Bioengineering. 3: 4. 309-316.

17.Liu, X., Yu, L., Xie, F., Petinakis, E., Sangwan, P., Shen, S., and Dean, K. 2013. New evidences of accelerating degradation of polyethylene by starch.J. of Applied Polymer Science.130: 4. 2282-2290.

18.Maia, T.H.S., Larocca, N.M., Beatrice, C.A.G., Menezes, A.J., Siqueira, G.F., Pessan, L.A., Dufresne, A., and
Franc, M.P., and Lucas, A.A. 2017. Polyethylene cellulose nanofibrils nanocomposites. Carbohydrate Polymers. 173: 50-56.

19.Matsumura, H., Sugiyama, J., and Glasser, W.G. 2000. Cellulosic nanocompositesthermally deformable cellulose hexanoates from heterogeneous reaction. J. of Applied Polymer Science. 78: 2242-2253.

20.Oksman, K., Mathew, A.P., Bondeson, D., and Kvien, I. 2006. Manufacturing process of cellulose whiskers/polylactic acid nanocomposites. Composites Science and Technology. 66: 15. 2766-2784.

21.Panaitescu, D.M., Notingher, P.V., Ghiurea, M., Ciuprina, F., Paven, H., Iorga, M., and Florea, D. 2007. Properties of composite materials from polyethylene and cellulose microfibrils. J. of Optoelectronics and Advanced Materials. 9: 8. 2524-2528.

22.Pandey, J.K., and Singh, R.P. 2005. Green nanocomposites from renewable resources: effect of plasticizer on the structure and material properties of clay filled starch. Starch. 57: 1. 8-15.

23.Petersson, L., and Oksman, K. 2006. Biopolymer based nanocomposites: comparing layered silicates and microcrystalline cellulose as nanoreinforcement. Composites Science and Technology, 66: 13. 2187-2196.

24.Mhumak, C., and Pechyen, C. 2017. Recycled polyethylene and waste cellulose composite: a strategic approach on sustainable plastic packaging application. J. of Waste Recycling. 2: 2:8. 1-7.

25.Poletto, M. 2016. Effect of styrene maleic anhydride on physical and mechanical properties of recycled polystyrene wood flour composites. Maderas. Cienciay Tecnología. 18: 4. 533-542.

26.Ramezani Kakroodi, A., Cheng, Sh., Sain, M., and Asiri, A. 2014. Mechanical, thermal, and morphological properties of nanocomposites based on poly (vinyl alcohol) and cellulose nanofiber from aloevera rind. J. of Nanomaterials. 2014: 3. 1-

27.Salehpour, Sh., Jonoob, M., Hamzeh, Y., and Khanali, M. 2018. Physical mechanical and photodegradation properties of poly (butylene succinate) / cellulosenan of ibernano composite. Forest and Wood Products. 70: 2. 161-171.

28.Salehpour, Sh., Rafieian, F., Jonoob, M., and Oksman, K. 2018. Effects of molding temperature, pressure and time on polyvinylalcohol nanocomposites properties produced by freeze drying technique. Industrial Crops and Products. 121: 2018. 1-9.

29.Sapkota, J., Natterodt, J.C., Shirole, A., Foster, E.J., and Weder, C. 2017. Fabrication and properties of  polyethylene/cellulosenanocrystalcompo sites. Macromolecular Materials and Engineering. 302: 1. 1-6.

30.Sarifuddin, N., Ismail, H., and Ahmad, Z. 2013. The effect of kenaf core fiber loading on properties of low density polyethylene/thermoplastic sago starch /kenaf core fiber composites. J. of Physical Science. 24: 2. 97-115.

31.Wang, B., and Sain, M. 2007. The effect of chemically coated nanofiberrein forcement on biopolymer based nanocomposite. BioResources. 2: 3. 371-388.

32.Yousefi, H., Azad, S., Mashkour, M., and Khazaeian, A. 2018. Cellulose nanofiber board, Carbohydrate polymers. 187: 133-139.

33.Yousefi, H., Azari, V., and Khazaeian, A. 2018. Direct mechanical production of wood nanofibers from raw wood micro particles with no chemical treatment. Industrial crops and products. 115: 26-31.

34.Yucheng, P., Gallegos, S.A., Gardner, D.J., Han Y., and Cai, Z. 2014. Maleic anhydride polypropylene modified cellulosenanofibril polypropylene nanocomposites withenhanced impact strength. Polymer Composites. 10: 1-12.