اثر تیمارحرارتی با روغن کلزا بر روی کیفیت سطح چوب صنوبر دلتوئیدس

1.Adela Salca, E., and Hiziroglu, S. 2014. Evaluation of hardness and surface quality of
different wood species as function of heat treatment. Materials and Design., 62: 416–423.
2.Amaral, R., and Hochong, L. 2002. Surface roughness. Power point.
3.Awoyemi, L., Cooper, P.A., and Ung, T.Y. 2009. In-treatment cooling during thermal
modification of wood in soy oil medium: Soy oil uptake, wettability, water uptake and
swelling properties. Eur. J. Wood.
4.Aydemir, D., Gunduz, G., Altuntas, E., Ertas, M., Sahin, H.T., and Alma, M.H. 2011.
Investigating changes in the chemical constituents and dimensional stability of heat-treated
hornbeam and uludag fir wood. Bio. Resources., 6: 2. 1308-1321.
5.Ayrilimis, N. 2005. Variations in compression strength and surface roughness of heat-treated
Turkish rirred gum (Eucalyptus Camaldulensis) wood. Scince links Japan. 4: 405- 409.
6.Ayrilmis, N., Candan, Z., Akbulut, T., and Balkiz, O. 2010. Effect of sanding on surface
properties of medium density fiber board. TnbusTRJA. 61: 3. 175-181.
7.Aytin, A., and Korkut, S. 2016. Effect of thermal treatment on the swelling and surface
roughness of common alder and wych elm wood. J. For. Res., 27: 1. 225–229.
8.Boonstra, M.J. 2008. A two-stage thermal modification of wood. Ph.D. Dissertation in
cosupervision Ghent University and Université Henry Poincaré- Nancy, France. 1-297p.
9.Candan, Z., Buyuksarıa, U., Korkut, S., Unsala, O., and Cakıcıer, N. 2012. Wettability and
surface roughness of thermally modified plywood panels. Industrial Crops and Products, 36:
434–436.
10.Chehreh, F., Farahani, M.R.M., and Mahounak, A.R.S. 2012. Effect of rapeseed oil heat
treatment using rapeseed oil on dimensional stability of Populus deltoides wood. Gorgan, J.
of Wood and Forest Science and Technology. 19: 2. 105-117. (In Persian)
11.Hill, A.S.C. 2006. Wood Modification Chemical, Thermal and other processes. John Wiley
and Sons Press England, Pp: 99– 127.
12.Hossaini, M. 2007. Investigation on dimensional stability and decay resistance of aceic
anhydryd and propionic anhidryde modified beech wood. M.Sc. Thesis. Gorgan, University
of Agricultural Science and Natural Resources. 75p. (In Persian)
13.Kamdem, P., and Grelier, S. 2002. Surface roughness and color change of Copper Amine
and UV maple (Acer rubrum) exposed to artificial ultraviolet light Holzforschung. 56: 473–
478. 14.Kantay, R., Unsal, O., and Korkut, S. 2003. Investigations of surface roughness of sliced
Walnut and Beech veneers produced in Turkey. Rev Forest Faculty, University of Istanbul
Ser A. 51: 1. 15–31.
15.Kasemsiri, P., Hiziroglu, S., and Rimdusit, S. 2012. Characterization of heat treated eastern
redcedar (Juniperus virginianaL). J. Materials Process Technology. 212: 1324 – 1330.
16.Kor, S. 2013. Investigation the effect of furfuryl alcohol on surface roughness of poplar
wood. M.Sc. thesis. College of wood and paper Engineering. Gorgan University of
Agricultural sciences and natural Resources. 1-67. (In Persian)
17.Moftikolayi, F.T. 2010. Surface roughness of chemical modified wood. M.Sc. thesis. College
of wood and paper Engineering. Gorgan University of Agricultural sciences and natural
Resources. 1-67. (In Persian)
18.Nuopponen, M., Vuorinen, T., Jämsä, S., and Viitaniemi, P. 2003. The effects of a heat
treatment on the behaviour of extractives in softwood studies by FTIR spectroscopic
methods. Wood Science and Technology, 37: 2. 109–115.
19.Ozcan, S., Ozcifci, A., Hiziroglu, S., and Toker, H. 2012. Effects of heat treatment and
surface roughness on bonding strength. Construction and Building Materials. 33: 7-13.
20.Rusche, H. 1973. Thermal degradation of wood at temperatures up to 200°C. Part II.
Reaction kinetics of loss of mass during heat treatment of wood. Holz als Roh-und
Werkstoff., 31: 8. 307-312. 21.Sailer, M., Rapp, A.O., Leithoff, H., and Peek, R.D. 2000. Vergu¨tung von Holz durch
Anwendung einerO¨ l- Hitzebehandlung (Upgrading of wood by application of an oil heat
treatment). Holz Roh Werkst., 58: 15-22. 22.Spear, M.J., Fowler, P.A., Hill, C.A.S., and Elias, R.M. 2006. Assessment of the envelope
effect of three hot oil treatments: Resistance to decay by Coniophora puteana and Postia
placenta. The International Research Group on Wood Protection, IRG/WP 06 – 40, Pp: 209–
216.
23.Tanaomi, A.R., Mohebby, B., and Ghahri, S. 2012. The Effect of Oleothermal Treatment on
Physical and Mechanical Properties of Beech Wood. J. Wood Forest Sci. Tech., 19: 3. 111-
126. (In Persian) 24.Tasdemir, C., and Hiziroglu, S. 2014. Measurement of various properties of Southern pine
and aspen as function of heat treatment. Measurement, 49: 91- 98.
25.Wang, J.Y., and Cooper, P.A. 2005. Effect of oil type, temperature and time on moisture
properties of hot oil-treated wood. Holz Roh Werkst. 63: 417– 422.
26.Zhong, Z.W., Hiziroglu, S., and Chan, C.T.M. 2013. Measurement of the surface roughness
of wood based materials used in furniture manufacture. Measurement. 46: 1482–1487.