بررسی ویژگی‌های بیومتری، فیزیکی و شیمیایی چوب بلوط ایرانی (Quercus brantii Lindl.) (مطالعه‌ی موردی؛ شهرستان لردگان)

1. Azizi, A. 1990. Comparison of Mechanical Properties of Oak Wood in Lowe and Nowshahr
Forests. M.Sc. Thesis, Tehran University. (In Persian)
2. Bakhshi, R., Kiaei, M., and Mousavi, S.M.S. 2012. Wood Properties Variation along Radial
Position in Quercus castaneaefolia. Middle-East Journal of Scientific Research., 11: 4. 511-
516.
3. Dehmardeh ghaleno, M. 2011. Investigation on Physical, Mechanical, Chemical and
Biometrical Properties of E. Camaldulensis Wood from Sistan Region. J. of Wood and
Forest Science and Technology. 18: 3.157-170. (In Persian)
4. Efhami sisi, D., and Saraeyan, A.R. 2009. Evaluation of Anatomical and Physical Properties
of Juvenile/Mature Wood of Populus alba and Populus × euramericana. Iranian Journal of
wood and Paper Science Research. 24: 1.134-147. (In Persian)
5. Franklin, G.L. 1954. A rapid method for softening wood for microtome sectioning, Tropical
woods. 88: 35-36.
6. Ghadery, I., Hassanzad navroodi, I., and Torkaman, J. 2013. Effect of Altitude on Annual
Diameter Growth of Quercus libani Oliv in Kurdistan Province. Journal of plant researches
(Iranian Journal of Biology). 26: 4.434-443. (In Persian)
7. Hejazi, R. 1978. The principle of wood description. Marvi, Tehran University, Tehran. (In
Persian)
8. Hemmasi, A.H., Soodmand, R., Varshoie, A., and Bazyar, B. 2006. Study of Height Effect
on Ovendry Specific Gravity and Biometrical Ratios in Iranian Beech tree Wood from
Siahkal Forest. Journal of Agricultural Sciences. 12: 4.913-922. (In Persian)
9. Hoseinzadeh, A., and Sheikholeslami, M. 1984. Investigation of Density Variation of 10
Hardwood Species in Aslam region. Publication 28, Research institute of Forests and
Rangeland publication. (In Persian)
10. IAWA Committee, 1989. IAWA list of microscopic features for hardwood identification by
an IAWA Committee. E.A. Wheeler, P. Baas and P.E. Gasson (eds.) IAWA Bull. n.s. 10:
3.219-332.
11. Ikonen, V.P., Peltola, H., Wilhelmsson, L., Kilpeläinen, A., Väisänen, H., Nuutinen, T., and
Kellomäki, S. 2008. Modelling the distribution of wood properties along the stems of Scots
pine (Pinus sylvestris L.) and Norway spruce (Picea abies (L.) Karst.) as affected by
silvicultural management. Forest Ecology and management. 1356-1371.
12. Krutul, D. 1988. Content and degree of arrangement of cellulose in oak wood according to
the location in the tree stem. Annals of Warsaw Agricultural University. Forestry and Wood
Technology. 38: 39-46.
13. Lashkarbolouki, E., and Parsapajouh, D. 2005. A Study of Anatomical Characteristics, Fiber
Biometry and Some Other Physical Properties of One of the Most Important Clones of
Poplar (Populus deltoides 77.51) in Gilan. Iranian J. Natural Res., 58: 1.195-207. (In
Persian)
14. Lundgren, C. 2004. Microfibril angle and density patterns of fertilized and irrigated Norway
spruce. Silva Fennica., 38: 1.107-117.
15. Roque, R.M., and Fo, M.T. 2007. Wood density and fiber dimensions of Gmelina arborea in
fast growth trees in Costa Rica: relation to the growth rate. Forest Systems, 16: 3, 267-276.
16. Oliva, AG., Baonza Merino, V., Fernández-Golfín Seco, JI., Conde García, M., and
Hermoso Prieto, E. 2006. Effect of growth conditions on wood density of Spanish Pinus
nigra. Wood Science and Technology. 40: 190-204.
17. Parsapajouh, D. 1994. Wood technology. Tehran University. Press, 404p. (In Persian)
18. Pourbabaei, H., Cheraghi, R., and Ebrahimi, S.S. 2015. The Study of Woody Species
Structure and Diversity in the Persian Oak (Quercus brantii Lindl.) Site, Dashtak, Yasouj,
Western Iran. Journal of Zagros Forests Researches., 2: 1.1-17. (In Persian)
19. Ramazani, Sh., Talaeipour, M., Aliabadi, M., Tabeei, A., and Bazyar, B. 2013. Investigation
of the anatomical, biometry and chemical characteristics of juvenile and mature poplar
(Populus alba) wood. Iranian Journal of wood and Paper Science Research., 28: 1.182-193.
(in Persian)
20. Sabeti, H. 1994. Forests, Trees and shrubs. Yazd University. Press, 810p. (In Persian)
21. Suleman, Th., and Alnajar, Lh. 1989. Oak Wood fiber dimensional variation as a basic
indication for pulping purpose. Secand pacific Regional Wood Anatomy conference.
22. Talebi, M., Sagheb Talebi, Kh., and Jahanbazi, H. 2006. Site demands and some quantitative
and qualitative characteristics of Persian Oak (Quercus brantii Lindl.) in chaharmahal and
Bakhtiari Province (western Iran). Iranian Journal of Forest and Poplar Research. 14: 1.67-
79. (in Persian)
23. Varshoie tabrizie, A., Parsa pajouh, D., and Shekholeslami, A. 2006. The effects of site
conditions on wood biometric coefficients in Iranian beech (Fagus Forestry and Wood
Technology). Journal of Agricultural Sciences., 12: 3.677-684. (In Persian)
24. Zhang, L., Deng, X., Lei, X., Xiang, W., Peng, C., Lei, P., and Yan, W. 2012. Determining
stem biomass of Pinus massoniana L. through variations in basic density. Forestry An
International Journal of Forest Research. 85: 601-609.
25. Zobel, B., and Van Buijtenen, J.P. 1989. Wood variation: Its causes and control. Springer-
Verlag, Berlin, Germany, 363p.